Sonic Mighty 8K: Installation

Sonic Mighty 8K: Installation

In this article, we will guide you through the steps of setting up your Sonic Mini 8K LCD 3D printer before you start 3D printing. 

After familiarizing yourself with the parts of the machine, now we are going closer to the more fun part of 3D printing. In this article, we will guide you through the step-by-step of setting up your Phrozen Sonic Mighty 8K LCD 3D printer before you start your 3D printing journey.

Step 1 : Remove the plastic cover.

Prepare Sonic Mighty 8K and open the case


Step 2 : Unscrew the thumb screw on both side and remove the resin vat.

Removing the resin vat from Sonic Mighty 8K


Step 3 : Peel off the protective film on the LCD.

Remove the protective layer of the Sonic Mighty 8K's LCD


Step 4 : Plug in the power cable at the back of the Sonic Mighty 8K.

Step 5 : Turn the switch on. It may take up to 2 seconds for the touch panel to light up. When you hear a loud beep, it means the device is ready for use.

Plug the power and turn on the switch of Sonic Mighty 8K


Click here to learn more about the new features on Sonic Mighty 8K: Printer Naming & Language Settings

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.