1. These resin parameters have been determined with a temperature of 25°C and a relative humidity of 75%. A test print was performed in a well-ventilated indoor space.
2. We used the Phrozen_XP_finder.stl (Download here) test print file to determine these resin parameters. Please use this STL file to test out the resin parameters before you begin printing. To learn more about how to dial in any resin with an XP_finder.
3. Phrozen Sonic Mini / Mini 4K is only able to read CTB files by Chitubox, Lychee, Formware, etc.
4. If your prints fail to stick onto the building plate, try increasing the bottom layer exposure time or check out our Help Center.

1. 這些樹脂參數於 25°C、相對濕度 75% 的條件下完成測定，並於通風良好的室內空間執行測試列印。 
2. 我們使用 Phrozen_XP_finder.stl 測試檔案（點此下載）來驗證並微調樹脂的曝光參數。強烈建議您在正式列印前先進行一次測試，以優化列印設定。如需進一步了解如何使用 XP_finder 微調任意樹脂，請參考我們的詳細教學。 
3. Phrozen Sonic Mini / Mini 4K 僅支援讀取由 Chitubox、Lychee、Formware 等切層軟體輸出的 CTB 檔案。 
4. 若您的列印件無法順利附著於平台，建議嘗試延長底層曝光時間，或前往我們的說明中心查詢相關資訊。