Sonic Mighty 8K：檢查固件以及如何重啟

Hello! I just got my Sonic Mighty 8K tonight, it’s stuck on a loading screen however and I can’t get it to get past it.
———
Phrozen Technology replied:
Hi Andrew, thanks for your comment! If you have a USB drive plugged in while booting up, please try boot your printer with no USB drive plugged in.

If it doesn’t help, please try reflash your firmware by following the instructions in this page. You can skip the FPGA update if you can not get in to the main menu, and later reflash it again with correct steps once you boot it up. Firmware downloads and release notes: https://reurl.cc/3×9Xol

If the steps above doesn’t work, please submit a request to us through the following URL, our support will help you solving the issue. Thank you! https://reurl.cc/jDoWRn

Best regards, Phrozen Team.

>

Hi again already tried to factory reset the printer to unlink the previous user from phrozen monitoring app but did not work any other solution ?
———
Phrozen Technology replied:
Hello Glissa, thank you for the reply. If resetting the printer is not working for you, please submit a customer support ticket to our support team using the URL down below, they will need you to provide the photo of the error message which contains the previous connected printer’s ID, and manually unbind the link for you. Sorry for the inconvenience, thank you!

https://reurl.cc/3xRm4V

Regards, Phrozen Team

Hey I just bought a used mighty 8k and it seems that the remote control is linked to last user how to reset that , thank you
———
Phrozen Technology replied:
Hello Glissa, thank you for your commnet. Please try go to the ‘Settings’ menu, select ‘System’, then choose the ‘Restore to Factory Settings’ option to see if it resets and clears the link to it’s previous owner’s.

Best, Phrozen Team.

bonjour impossible de me servir de mon ecran tactil sur mighty 8K j ai demonter la facade avant debrancher la nappe de la carte mere a l ecran puis rebrancher remonter toujours rien mettre a jour le firware sur 1 cle usb impossible vue que l ecran reste bloque de l aide merci
———
Phrozen Technology replied:
Hi JC Higy, thank you for commenting. We suggest you contact our custom support by submit a request using the URL down below so we can better diagnose the machine’s problem. Thank you!

https://reurl.cc/11b18p

Best, Phrozen Team

>

I’ve just bought a Phrozen mighty 8K and I have the following problems:
1) In the test hardware directory the Z sensor remains in off.
2) When I touch for the fotocamera test ir says that it is impossibile find the fotocamera.
The firmware is PH-V1.2.6/V32.18
———
Phrozen Technology replied:
Hi Marco,

Thank you for the comment! We would suggest you to upgrade the frimware to the latest version to see if the problem you have will still exists. Also in order to have the camera function to work properly, you will need a firmware version of 1.3.6 or later. Please check this website for more details about updating the firmware. Thank you!

https://reurl.cc/ykdoEl

Best regards, Phrozen Team

>

My phrozen sonic xl 4k 2022 stuck in logo screen, any help?
———
Phrozen Technology replied:
Hi Brini,

Thank you for reaching us. We will suggest you to refalsh the firmware to see if it solves the problem. To do so, please check the article about the firmware update instructions in our helpcenter (lind down below), where you can also download the firmware. In order to prevent the crash of the SD card, we suggest that you shut down the printer first, wait for over 30 seconds and power supply turned off, insert the SD card with the correct firmware files in it, then turn on the powersupply and the printer to update the firmware and see if it solves your problem.

https://reurl.cc/jlYMML

We hope this helps and wish you a happy printing.

Regards,

Phrozen Team

>

Hey, I’ve updated my Sonic Mighty 8K printer with the latest firmware (V136b released Dec 29, 2022) and after the update the z-axis control does not work and I can’t print at all. I’m 100% sure I’ve updated the printer with the instructions provided by Phrozen to the letter.

———
Phrozen Technology replied:
Hello Juha,

Thank you for commenting. Please make sure v136b system firmware on your Sonic Mighty 8k is paired with v32.20 FPGA firmware. You can check both your firmware version in the Hardware Testing tab inside System > Settings. If the version is incorrect, please update the firmware again by following instructions carefully, you must update FPGA firmware first, then system firmware. If your version is correct but the printer is still not working after trying a update again, please contact our customer support team by submit a request form, which you can find in our helpcentre or use the link down below:

https://reurl.cc/Y8d7xl

We hope this helps and wish you a happy printing.

Regards, Phrozen Team.

>

I am having an issue. Last week my printer was working fine, but this week the print button is greyed out for everything, including local file copies of the provided test prints. I tried a factory reset but that didnt solve the issue.

Thanks.
———
Phrozen Technology replied:
Hi Jacob,

Thank you for commenting. The grayed out printed button usually means the settings in the .ctb file you’ve selected are incompatible with your printer. To solve this issue, please load your .ctb file into Chitubox, select the correct printer profile corresponding to your printer model, adjust the exposure settings to your needs, slice it again and save the file. Then read the new .ctb file you’ve just sliced on the printer to see if the print button is available.

Hope this helps, we wish you a happy printing.

Regards, Phrozen Team.

>

After firmware update, when I go z axis control and tell it to raise the bed, it does nothing.
———
Phrozen Technology replied:
Hi Nick,

We have some Sonic Mighty 8K users report the same issue as yours. To our research, update the firmware again should solve the problem. Please make sure you have followed the instructions on the firmware download page. (or the link down below)

https://reurl.cc/Dm6Z8j

For updating Sonic Mighty 8K’s firmware, you have to update the FPGA firmware first, then the paired system firmware that comes with it. Please do follow the instructions to avoid any failure that could occur during the process.

Hope you find this helpful.

Regards, Phrozen Team.

>

I am using chitubox, select my printer and add a 3d model, then export to .ctb, but when I go to the printer with usb and select the file, the print button appears disabled, can you please help me with this problem? I tried with the test .ctb that comes in the usb and with those if the print button is enabled in orange
———
Phrozen Technology replied:
Hi John,

If the pre sliced file is working for you, but file you’re slicing is not working, then it means it’s either your slicer settings are incorrect, your slicer’s have problem, or the USB drive you’re using is corrupted.

Please make sure you’re selecting the right profile that matches your printer, if you’re using Chitubox v1.9.0 or later, please make sure you have update your printer to the latest version of firmware. 3D printers only accept USB drives with capacity of 8GB or 16GB, formatted to FAT32, and allocation unit size of 2048 bytes with 8GB drives, 4096 bytes with 16GB drives.

Hope this could help you to solve your problem.

Regards, Phrozen Team.

>

I just bought the Mega 8K. My screen does not have settings on it. It just has print, tools and info.
———
Phrozen Technology replied:
Hi Ranger, please fill out the form, and our team will get back to you soon: https://phrozen3d.net/U3GT4.

Cheers, Phrozen Team

>