Squeaky Clean With Up to 90% Less Alcohol
Reduce alcohol consumption by up to 90% when printing with Water-Washable Tough. Simply clean with Phrozen Washing Station and water, it's safer, less hassle, and friendlier to your wallet!
A Tougher Water-Washable*
While water-washable resin is known to be brittle, our Water-Washable Tough is formulated differently! With 2x toughness compared to most water-washable resins, it creates more durable models with a bit of flex*.
Improved Experience, Better Prints
Experience 3D printing the new way with less odor, less alcohol, and an easy-to-print formula. Plus, tougher models mean you don’t need to worry about accidental breakage during removal and handling.
Suitable for Various Applications
Whatever you set your mind to, Water-Washable Tough can do!
Small minis, medium figurines, or large statues, everything can be printed with Water-Washable Tough.
If ease of cleaning and alcohol saving are your priorities, you could never go wrong with this resin.
Water-Washable vs. Water-Washable Tough
*Water-Washable Tough resin is tougher than usual water-washable resin but not as tough as typical engineering tough resins.
If your models require higher strength and impact resistance, please check our RPG Resin or engineering resins.
How to Post-Process Water-Washable Resin
As straightforward as it is, there are always some tips and tricks that will help you navigate your water-washable journey. Learn how to post-process your prints properly, how to handle the wastewater, and more!
1. Remove From Building Plate
2. Wash With Water
*Don't dump wastewater directly into the drain.
3. Dry and Cure
4. Completed
Cleaning
1. Remove models from the building plate.
2. Wash models in a Washing Station filled with water or 95% ethanol for 45–60 seconds. When washing with water, we recommend a final quick rinse with ethanol for cleaner results.
3. After cleaning, leave it to air dry for at least 30 minutes or use a compressed air gun.
*When printing flat on the building plate, remove the printed objects carefully to avoid deformation on the objects.
*If models are hollowed, make sure the inner parts are thoroughly cleaned.
*Do not soak models in solvent for more than 60 seconds to avoid surface damage.
Post-Curing
1. Post-cure the models in post-curing stations like Phrozen Cure or Phrozen Cure Mega S to post-cure the models for 30 minutes for the best results.
