切片 3D 文件後，是時候了解一些使用Sonic Mega 8K打印 3D 模型的獨家提示和技巧了！讓我們開始吧：
3D 打印技巧
我們幾乎準備好開始打印了！但在我們這樣做之前，請記住以下幾點提示：
首先，確保構建板沒有上次打印作業遺留下來的任何樹脂殘留物。
其次，在安裝樹脂缸之前，確保樹脂缸和液晶屏非常乾淨。
第三，將Aqua-Gray 8K 樹脂均勻搖動約 30 秒至 1 分鐘，然後再將樹脂倒入大桶中。澆注樹脂時，確保它不超過樹脂桶上的最大填充線。您需要倒入大約 1 瓶半樹脂。
第四，我們準備打印了！在觸摸屏上，點擊PRINT ，選擇您的 .ctb 文件，然後點擊Go 。確保室門已正確關閉，以防止其他光源在打印過程中扭曲您的 3D 模型。
第五，打印時，一定要檢查你的打印件。如有必要，當構建板抬起時，向樹脂桶中添加更多樹脂。這是為了確保您不會用完樹脂，從而導致打印失敗。然後關閉腔室門以繼續打印過程。
第六，你完成了！這幅畫終於完成了。由於打印件可能很重，我們建議您在取出最終打印件時準備一個托盤。
第七，將建築板的長邊放在桌子上。然後使用工具箱中提供的金屬刮刀輕輕去除打印件。然後用手取下支撐物。由於支架的尖端可能非常鋒利，因此請小心不要在這樣做時傷到自己。
注意：如果樹脂桶中有任何剩餘樹脂，您可以將其過濾並用於下一次打印。
完成後，是時候繼續進行後期處理了。
單擊此處查看完整的 Sonic Mega 8K 入門指南。
4條評論
Alejandro
Good Morning
my prints some of them are brittle how can I have the more strong!
———
Phrozen Technology replied:
Hi Alejandro,
Thank you for commenting! If you want your printed model to be more stiffed, you should check out our functional resins, such as ONYX Impact Plus, Rock-Black Stiff and Nylon Green Tough resin. These resins are designed for people who prints engineering model or prototype with endurance and heavy duty usage in mind.
Hope this helps and we wish you a happy printing.
Regards, Phrozen Team.
>
Good Morning
my prints some of them are brittle how can I have the more strong!
———
Phrozen Technology replied:
Hi Alejandro,
Thank you for commenting! If you want your printed model to be more stiffed, you should check out our functional resins, such as ONYX Impact Plus, Rock-Black Stiff and Nylon Green Tough resin. These resins are designed for people who prints engineering model or prototype with endurance and heavy duty usage in mind.
Hope this helps and we wish you a happy printing.
Regards, Phrozen Team.
>
T-hato
My prints have come back with horizontal spaces, what are the ideal settings for use for the sonic mighty 8 k with aqua resin using chitubox?
———
Phrozen Technology replied:
Hi T-hato, You can check our recommended resin profile here: https://phrozen3d.net/87HJr. Or fill out the form here: https://phrozen3d.net/U3GT4 to have our support team assist you shortly.
Cheers, Phrozen Team
>
My prints have come back with horizontal spaces, what are the ideal settings for use for the sonic mighty 8 k with aqua resin using chitubox?
———
Phrozen Technology replied:
Hi T-hato, You can check our recommended resin profile here: https://phrozen3d.net/87HJr. Or fill out the form here: https://phrozen3d.net/U3GT4 to have our support team assist you shortly.
Cheers, Phrozen Team
>
Printerwall
I was working on 2D printing till the date, But your this post make the 3D printing very easy for me. Thanks and keep sharing such a valuable stuff.
I was working on 2D printing till the date, But your this post make the 3D printing very easy for me. Thanks and keep sharing such a valuable stuff.
Mo
Hi,
What is the easiest way to remove the model after printing other than the metal scraper to avoid scratches and damage to the print plate? Thank you
———
Phrozen Technology replied:
Hi Mo,
Metal scraper is still the easiest way to remove your models from the building plate. That said, scratches on the building plate are normal and won’t affect your printing results.
Cheers, Phrozen Team
>
Hi,
What is the easiest way to remove the model after printing other than the metal scraper to avoid scratches and damage to the print plate? Thank you
———
Phrozen Technology replied:
Hi Mo,
Metal scraper is still the easiest way to remove your models from the building plate. That said, scratches on the building plate are normal and won’t affect your printing results.
Cheers, Phrozen Team
>