跳到內容
樹脂簡介
索尼克超級 8K S
- 這些樹脂參數是在 25°C 溫度和 75% 相對濕度下測定的。在通風良好的室內空間進行測試列印。
- 我們使用Phrozen_XP_finder（在此下載）。 stl 測試列印文件以確定這些樹脂參數。了解有關如何使用 XP_finder 撥入任何樹脂的更多資訊。
- Phrozen Sonic Mega 8K S 只能透過Chitubox 1.9.6 或更高版本讀取 CTB 檔案。如果您願意，也可以使用任何其他切片軟體。
- 如果您的列印件無法黏附到建造板上，請嘗試增加底層曝光時間或查看我們的幫助中心。
| Basic Info |
Layer Height(mm) |
0.05 |
| Retract Speed(mm/min) |
150 |
| Bottom Layers |
Layer Count |
6 |
| Exposure Time(s) |
25-35 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Light-off Delay(s) |
10 |
| Transition Layers |
Layer Count |
6 |
| Normal Layers |
Exposure Time(s) |
2.0-2.5 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Light-off Delay(s) |
10 |
| Basic Info |
Layer Height(mm) |
0.05 |
| Retract Speed(mm/min) |
150 |
| Delay(ms) |
6 |
| Burn Layers |
Layers(Numbers) |
25-35 |
| Cure Time(ms) |
6 |
| Lift Height(mm) |
60 |
| Up Speed(mm/min) |
10 |
| Normal Layers |
Cure Time(ms) |
6 |
| Lift Height(mm) |
2.0-2.5 |
| Up Speed(mm/min) |
6 |
| Basic Info |
Layer Height(mm) |
0.05 |
| Retract Speed(mm/min) |
150 |
| Bottom Layers |
Layer Count |
6 |
| Exposure Time(s) |
25-35 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Light-off Delay(s) |
10 |
| Normal Layers |
Exposure Time(s) |
2.0-2.5 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Light-off Delay(s) |
10 |
| Basic Info |
Layer Height(mm) |
0.05 |
| Retract Speed(mm/min) |
150 |
| Bottom Layers |
Layer Count |
6 |
| Exposure Time(s) |
25-35 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Transition Layers |
Layer Count |
6 |
| Normal Layers |
Exposure Time(s) |
2.0-2.5 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Waiting Mode During Printing |
Mode |
Resting time |
| Rest Time After Retract(s) |
3 |
| Basic Info |
Layer Height(mm) |
0.05 |
| Bottom Layers |
Layer Count |
6 |
| Exposure Time(s) |
25-35 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Retract Distance(mm) |
6 |
| Retract Speed(mm/min) |
60 |
| Transition Layers |
Layer Count |
6 |
| Normal Layers |
Exposure Time(s) |
2.0-2.5 |
| Lifting Distance(mm) |
6 |
| Lifting Speed(mm/min) |
60 |
| Retract Distance(mm) |
6 |
| Retract Speed(mm/min) |
60 |
| Waiting Mode During Printing |
Mode |
Resting time |
| Rest Time After Retract(s) |
3 |
| Basic Info |
Layer Height(mm) |
0.05 |
| Retract Speed(mm/min) |
150 |
| Bottom Layers |
Layers(Numbers) |
25-35 |
| Cure Time(s) |
6 |
| Lift Height(mm) |
60 |
| Lift Speed(mm/min) |
10 |
| Lift-off Delay(s) |
10 |
| Normal Layers |
Cure Time(s) |
6 |
| Lift Height(mm) |
2.0-2.5 |
| Lift Speed(mm/min) |
6 |
