在本文中，我們將指導您在開始打印 3D 模型之前完成Sonic Mega 8K LCD 3D 打印機的設置步驟。
- 安裝把手
- 打開樹脂 3D 打印機
安裝把手
使用工具箱中包含的內六角扳手安裝門把手。
打開樹脂 3D 打印機
插入位於 Sonic Mega 8K 背面的電源線，然後打開開關。
觸摸面板點亮最多可能需要 2 秒。一旦您聽到一聲響亮的嗶嗶聲，則表示該設備已準備就緒。
單擊此處了解如何在 Sonic Mega 8K 3D 打印機上進行測試打印。
Sonic Mega 8K Starter Guide
Sonic Mega 8K：設置
在本文中，我們將指導您在開始打印 3D 模型之前完成 Sonic Mega 8K LCD 3D 打印機的設置步驟。
3條評論
WILSON CLAVIJO
HASTA AHORA VAMOS MUY BIEN
HASTA AHORA VAMOS MUY BIEN
Ryan Brundle
Hey,
Is there an exhaust port on the mega 8k/8kS that I can hook up to my ventilation?
———
Phrozen Technology replied:
Hi Ryan,
Thank you for your question. The Sonic Mega 8K and 8KS do not have a dedicated exhaust port for ventilation. We recommend building an enclosure around the printer to isolate and ventilate any volatile matters if needed. This way, you can create a controlled environment for your printing process.
If you have further inquiries or if there’s anything else we can assist you with, please feel free to let us know.
Best regards, Phrozen Team
>
Hey,
Is there an exhaust port on the mega 8k/8kS that I can hook up to my ventilation?
———
Phrozen Technology replied:
Hi Ryan,
Thank you for your question. The Sonic Mega 8K and 8KS do not have a dedicated exhaust port for ventilation. We recommend building an enclosure around the printer to isolate and ventilate any volatile matters if needed. This way, you can create a controlled environment for your printing process.
If you have further inquiries or if there’s anything else we can assist you with, please feel free to let us know.
Best regards, Phrozen Team
>
dami
HI,
I do i get my 3d mega 8k ip.. the drive is not understandable..
———
Phrozen Technology replied:
Hi, thank you for your comment. If you need assistance with the printer, please contact our support team by filling out the form here: https://helpcenter.phrozen3d.com/hc/en-us/requests/new?ticket_form_id=6949221903897
>
HI,
I do i get my 3d mega 8k ip.. the drive is not understandable..
———
Phrozen Technology replied:
Hi, thank you for your comment. If you need assistance with the printer, please contact our support team by filling out the form here: https://helpcenter.phrozen3d.com/hc/en-us/requests/new?ticket_form_id=6949221903897
>