Resin or FDM, Clean Air as Always
Say goodbye to 3D printing fumes, stinky chemical smell, and floating dust—no more risking your health.
6-Layer Strong Defense
Traps Dust, Locks Smells
3-Speed Fan Control
1-Second Filter Swap
Works with FDM & LCD
Ultra-Quiet
42dB
Tired of Resin Smells and Dust Taking Over Your Space?
From plastic fumes to resin odors and dust, Air Purifier Max clears the air in one simple step.
FDM printers can pump out microscopic dust, way higher than city air pollution levels.
Resin printing releases TVOCs — invisible chemicals that linger in the air you breathe.
Breathe Easy — 6-Layer Dual HEPA for Stronger Protection
Filters out PM2.5, VOCs, and fine dust. Leaving only clean air so you can stay focused on your creations.
1. Pre-Filter Protection
Stops larger particles right at the start, so inner filters last longer — even after countless print runs.
2. Large Particle Filtration
Keeps plastic bits and powder from floating around your workspace.
3. HEPA Fine Dust Filter
Catches tiny particles from ABS and Nylon prints.
4. Extra Particle Shield
One more protection to stop any particle that escapes the first filter.
5. Double HEPA Protection
Clears out the super-fine dust your eyes can’t see, but your nose can feel.
6. Odor Removal
No more harsh plastic smell taking over your room.
Arco works with Air Purifier Max — print the adapter to connect with PentaShield. File coming to Pixup mid-November. See FAQ below for details.
1.Pre-Filter Protection
Traps large resin fragments early, so inner filters last longer—eeven after countless print runs.
2. Large Particle Filtration
Traps resin chips and sanding fragments before they float into the room.
3. HEPA Fine Dust Filter
Captures strong VOC fumes from liquid resin, especially those from high-performance engineering resins.
4. Extra Particle Shield
Traps cured resin bits that sneak through the early stages.
5. Double HEPA Protection
One more protection to trap lingering VOCs during continuous resin printing.
6. Odor Removal
Locked away sharp resin odors, keeping your space fresh and comfortable.
精準收集不外漏
避免氣味與廢氣外洩，守護工作環境
Catch Fumes at the Source — Keep Your Room Fresh
Hook the hose right to your printer, so odors, dust, and VOCs never even hit the air you breathe.
Printer-to-Purifier Design
Directs fumes straight into the purifier for immediate capture.
No Leaks, No Smells
Closed-loop system keeps odors locked away, 24/7.
Universal Compatibility
Fits LCD resin printers, FDM printers, and laser engravers with a Ø70 mm inlet and Ø75 mm × 2 m hose.
Three Fan Modes — Clean Air, Your Way
From large or high-volume to overnight prints, one tap is all it takes to keep your workspace clean and odor-free.
Power Mode
High-Emission Prints
240 m³/h
Big prints, ABS, Nylon, or laser engraving? Go full power and watch fumes vanish instantly.
Balanced Mode
Daily Prints
100 m³/h
Your everyday go-to. Quiet enough to forget, strong enough to keep the air fresh.
Quiet Mode
Energy-Saving Prints
60 m³/h
Overnight or small prints? This mode runs quietly while using less power and keeps filtering resin fumes while you rest.
All-Around Comfort for Every Print
Swap Filters in 1 Second—No Tools Needed
Pop it out like a drawer, slide in the new one, done. The built-in reminder has your back—no more forgetting, zero downtime, just non-stop filtering.
Quiet & Efficient — 24/7 Protection
Runs at just 42 dB, as quiet as a library. Works all night without wasting energy or disturbing your rest.
Compact Size, Full Power Purification
Slim and space-saving. Fits anywhere—home, studio, or workshop—while keeping the air fresh and safe.
Specifications
Item | Details |
|---|---|
Main Unit Size | 290 x 300 x 430 mm |
Main Unit Weight | 10.5 kg |
Included Filters | - Top G4 Filter Cotton ×1 |
Max Airflow | 240 m³/h |
Inlet Size | φ70 mm |
Hose Size | φ75 × 2,000 mm |
Note: The top G4 filter cotton is only included with new units. For replacement, please cut standard G4 filter sheets to size. (Reference spec: 40 mm thickness)
Replacement Filters
HEPA Filter Replacement
Filters out 99% of dust, fine particles, filament smoke, and resin micro-particles
Operational Life: ~1200 hours
Activated Carbon Filter Replacement(5-Pack)
Absorbs up to 80% of resin odor, plastic smell, cleaning solvent fumes, and volatile gases
Operational Life: ~800 hours
Popular Brand Comparison
Item | Phrozen | Brand C | Brand B |
|---|---|---|---|
Filter System | 6 layers 更大! | 5 layers | 4 layers |
Particulate Filtration System | 40 mm G4 Filter Cotton ×3 | G4 Filter Cotton ×1 | G4 Filter Cotton ×1 |
Odor Filtration System | 40 mm Activated Carbon Filter ×1 | Activated Carbon Filter ×3 | None |
Compatibility | PhrozenMega 8K S
ElegooMars 5 Ultra BambulabH2D* | Brand C 3D Printers | Limited Models of 3D Printers |
*Standard Magnetic Exhaust Port: Ø74 mm If your machine’s exhaust port has a different diameter, you can use a 3D-printed adapter in the matching size.
