Phrozen High-Speed PLA 3D Printing Filament
VISIT OUR STORE SITES TO MAKE A PURCHASE!
Colorful Collection to Choose From
Comes with 8 bright and exciting colors for you to choose from, including black, white, red, blue, green, yellow, orange, and gray.
PLA Specifications
| Density | 1.2—1.25g/cm² |
| Tensile Strength (MPa) | 55+/-10% |
| Tensile Modulus (MPa) | 1200 +/-10% |
| Elongation at Break (%) | 10.2 +/-10% |
| Bending Strength (MPa) | 70 +/-10% |
| Bending Modulus (MPa) | 1606 +/-10% |
| Impact Strength (J/m) | 50+/-10% |
| Shrinkage Rate | 0.5% |
| Heat Deflection Temperature (@0.45MPa) | 50°C |
| MFI (Melt Flow Index) | 10.68g/10min |
| Nozzle Temperature | 190-220°C |
| Bed Temperature (PEI Plate) | 45~60°C |
| Printing Speed | Up to 600 mm/s |
How to Post-Process Ceramic Pro Resin
支撐拆除與預先清理
1. 將模型放入裝滿 99% 乙醇的清洗機中清洗 30-60 秒。
2. 清洗後讓模型自然風乾至少30分鐘，避免直接接觸光線。或者使用氣槍吹乾。
3. 清除孔洞中的殘留樹脂。
光固成形與熱固化
1. 將模型放入後固化機中，例如：普羅森 Cure 或普羅森 Cure Mega S，進行120分鐘的後固化(每側各60分鐘)，確保最佳效果。
2. 如需進一步增強模型的機械性能，可進行額外的熱處理。
一句話說明熱處理的設定
| Time Setting Settings | Temperature Setting | |
|---|---|---|
| Ramp up phase | 2 hours | 30°C ~ 150 °C |
| Wall thickness | ≥ 1.5 mm | |
| Lifting speed | 120 - 150 mm/min | |
| Support thickness | 1.0 mm or ≥ 1.2 mm |
*Note:
1. To reduce deformation, printing directly on the building plate is recommended. If the model needs to be supported, please refer to point 2.
2. If the gaps between supports or within the model structure are too narrow, the resin may not cure properly and solidify in those areas.
3. When printing, reducing lifting and return speed while increasing the rest time is recommended for a successful print. Please adjust the return speed according to the model type.
4. Thermal post-curing can help improve the mechanical properties of the material, especially the tensile and tear strength, but may reduce ductility.
Launched to accompany our first-ever FDM 3D Printer, Phrozen High-Speed PLA comes in 8 exciting color choices, opening up the horizon for boundless colorful creations and possibilities!
Use Phrozen High-Speed PLAs together with Phrozen Arco to achieve rapid printing without sacrificing quality and reliability.
Benefits
- Fast Printing Speed: Complete your prints in a shorter time when used together with Phrozen Arco.
- Maintain Quality Even at High Speed: With outstanding fluidity, Phrozen High-Speed PLA facilitates faster and smoother extrusion with quicker cooling for high-quality prints.
- Colorful Collection to Choose From: Comes with 8 bright and exciting colors for you to choose from, including black, white, red, blue, green, yellow, orange, and gray.
- Best Bang for Your Buck: Whether you are a seasoned 3D printing enthusiast or a beginner dipping your toes into FDM 3D printing, the Phrozen High-Speed PLA is an affordable option to kickstart your journey on the right foot.
Specs
- Density: 1.2—1.25g/cm2
- Tensile Strength (MPa): 55+/-10%
- Tensile Modulus (MPa): 1200 +/-10%
- Elongation at Break (%): 10.2 +/-10%
- Bending Strength (MPa): 70 +/-10%
- Bending Modulus (MPa): 1606 +/-10%
- Impact Strength (J/m): 50+/-10%
- Shrinkage Rate: 0.5%
- Heat Deflection Temperature (@0.45MPa): 50°C
- MFI (Melt Flow Index): 10.68g/10min
- Nozzle Temperature: 190-220°C
- Bed Temperature (PEI Plate): 45~60°C
- Printing Speed: Up to 600 mm/s
Shipping & Tariff
The purchase price does not include any taxes, tariffs, and/or shipping costs. Please note that we WILL NOT be providing a refund if a customer refuses to collect (or returns) their product(s) due to customs fees/duties and/or other related costs.
Please note that the shipping cost will vary from country to country; for the exact cost, please view our check-out page.
For more information, please refer to our Shipping Policy page.