樹脂プロファイル
シャッフル
1. Shuffle 2018 / Shuffle 2019 / Shuffle Liteの設定は、Phrozen OS Interfaceで調整する必要があります。
2.このリストに使用するレジンが表示されない場合は、 レジン露出ファインダーを使用して設定を調整できます。
3.プリントが建築プレートに貼りつかない場合は、最下層の露光時間を増やしてみてください。または、よくある質問ページをご覧ください。
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Retract Speed(mm/min) | 150 | |
Bottom Layers | Layer Count | 6 |
Exposure Time(s) | 25-35 | |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Light-off Delay(s) | 10 | |
Transition Layers | Layer Count | 6 |
Normal Layers | Exposure Time(s) | 2.0-2.5 |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Light-off Delay(s) | 10 |
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Retract Speed(mm/min) | 150 | |
Delay(ms) | 6 | |
Burn Layers | Layers(Numbers) | 25-35 |
Cure Time(ms) | 6 | |
Lift Height(mm) | 60 | |
Up Speed(mm/min) | 10 | |
Normal Layers | Cure Time(ms) | 6 |
Lift Height(mm) | 2.0-2.5 | |
Up Speed(mm/min) | 6 |
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Retract Speed(mm/min) | 150 | |
Bottom Layers | Layer Count | 6 |
Exposure Time(s) | 25-35 | |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Light-off Delay(s) | 10 | |
Normal Layers | Exposure Time(s) | 2.0-2.5 |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Light-off Delay(s) | 10 |
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Retract Speed(mm/min) | 150 | |
Bottom Layers | Layer Count | 6 |
Exposure Time(s) | 25-35 | |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Transition Layers | Layer Count | 6 |
Normal Layers | Exposure Time(s) | 2.0-2.5 |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Waiting Mode   During Printing | Mode | Resting time |
Rest Time After Retract(s) | 3 |
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Bottom Layers | Layer Count | 6 |
Exposure Time(s) | 25-35 | |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Retract Distance(mm) | 6 | |
Retract Speed(mm/min) | 60 | |
Transition Layers | Layer Count | 6 |
Normal Layers | Exposure Time(s) | 2.0-2.5 |
Lifting Distance(mm) | 6 | |
Lifting Speed(mm/min) | 60 | |
Retract Distance(mm) | 6 | |
Retract Speed(mm/min) | 60 | |
Waiting Mode   During Printing | Mode | Resting time |
Rest Time After Retract(s) | 3 |
Basic Info | Layer Height(mm) | 0.05 |
---|---|---|
Retract Speed(mm/min) | 150 | |
Bottom Layers | Layers(Numbers) | 25-35 |
Cure Time(s) | 6 | |
Lift Height(mm) | 60 | |
Lift Speed(mm/min) | 10 | |
Lift-off Delay(s) | 10 | |
Normal Layers | Cure Time(s) | 6 |
Lift Height(mm) | 2.0-2.5 | |
Lift Speed(mm/min) | 6 |