4-Tube DirectFeed, 50% Faster Color Swaps
Skip the slow loading of traditional 4-in-1-out systems. Chroma Kit uses four independent filament tubes that feed directly into the print head. This design reduces color change time by 50%, making multi-color prints faster and more efficient.
70°C High-Temperature Filament Drying
Say goodbye to brittle, moisture-damaged prints. Chroma Kit heats filament to 70°C, removing humidity to ensure better flow, enhanced layer adhesion, and a smooth surface finish even during long prints.
6 Preset Drying Profiles.One-Tap Drying
Chroma Kit comes with six built-in drying profiles, supporting
PLA, PETG, PET, ASA, ABS*, and PA*. With just one tap, you can start drying immediately—no manual setup required.
*ABS and PA can only be dried, not printed with the Chroma Kit.
Smart Material Control, Built Into Chroma Kit
Automated Filament Switching
When a spool runs low, Chroma Kit automatically switches to the next one. This is ideal for long-duration or large-format prints using a single material.
*Only supports switching between filaments of the same color and material
Run-Out Detection
Receive instant alerts when filament is depleted to prevent print failures.
Remote Monitoring
Track filament feed and print status via PIXUP FDM Slicer, anytime, anywhere.
Optimizedfor ARCO. Simple and Flexible Installation.
Chroma Kit is fully compatible with the ARCO 3D printer, delivering a smooth and efficient multicolor printing experience. You can install it easily using the PentaShield enclosure or your own custom-printed brackets.
Self-Printed Bracket
Print your own mounting brackets to attach Chroma Kit securely to the top of your ARCO. This setup is flexible, cost-effective, and ideal for users who prefer a customizable installation.
With PentaShield
Mount Chroma Kit on the PentaShield enclosure for a stable, enclosed setup. Enjoy improved airflow, auto temperature control, noise reduction, and air purification—all designed to boost print quality and workspace comfort.
Specifications
| Product Size | 364 x 306 x 250 mm |
| Maximum Drying Temperature | up to 70°C (Also have desiccant) |
| Wire Diameter | 1.75 mm |
| Supported spool size* | Width: 50-60 mm
Diameter: 197-202 mm |
| Maximum Hotend Flow Rate | 50 mm³/s |
| Number of Supported Filament Colors | 4 colors** |
| Applicable Materials | For printing: PLA, PETG, ASA, PET
For drying: PLA, PETG, ABS, ASA, PA, PET |
| Auto Filament Replacement | Supported (monochrome print mode only) |
| Insufficient material detection | Supported |
**More color will potentially be made available with future upgrades.
