Reduce alcohol consumption by up to 90% when printing with Water-Washable Tough. Simply clean with Phrozen Washing Station and water, it's safer, less hassle, and friendlier to your wallet!
Cleaning
1. Remove the models from the building plate.
2. Wash the models in a washing station filled with water or 95% ethanol for 45–60 seconds. If washing with water, we recommend a quick final rinse with ethanol for cleaner results.
3. After cleaning, let the models air-dry for at least 30 minutes, or use compressed air to speed up drying.
*If you print flat on the building plate, remove the prints carefully to avoid deformation.
*If the models are hollow, make sure the inside is thoroughly cleaned.
*Do not soak models for more than 60 seconds, as prolonged exposure may damage the surface.
*Do not pour wastewater directly down the drain.
Post-Curing
1. Post-cure the models in a curing station (e.g., Phrozen Cure or Phrozen Cure Mega S) for 30 minutes for best results.
