Air Purifier Max

Tired of Resin Smells and Dust Taking Over Your Space?

From fine particles produced during FDM printing to resin odors from LCD printing, Air Purifier Max helps filter airborne particles and reduce odors in your workspace.

FDM 3D printer hotend printing gears, with fine smoke rising around the print head.

FDM printers can pump out microscopic dust, way higher than city air pollution levels.

Resin printing may release VOCs, invisible chemicals that can linger in the air you breathe.

Designed for 3D printing spaces, Phrozen Air Purifier Max uses multi-layer filtration to capture dust and help reduce odors for a cleaner workspace.

Person working at a desk beside a Phrozen resin 3D printer and the Air Purifier Max, while a child plays nearby.

6-Layer Strong Defense
Traps Dust, Locks Smells
3-Speed Fan Control
1-Second Filter Swap
Works with FDM & LCD
Ultra-Quiet 42dB

Combining G4 pre-filters, dual HEPA H12 filters, and activated carbon, the six-layer system captures fine particles and helps adsorb odors to improve air quality around your printing setup.

FDM LCD

Illustration of the six filter layers in the Air Purifier Max, from G4 pre-filters through HEPA to activated carbon.

1. Pre-Filter Protection

Stops larger particles right at the start, so inner filters last longer, even after countless print runs.
2. Large Particle Filtration

Keeps plastic bits and powder from floating around your workspace.
3. HEPA Fine Dust Filter

Catches tiny particles from ABS and Nylon prints.
4. Extra Particle Shield

One more protection to stop any particle that escapes the first filter.
5. Double HEPA Protection

Clears out the super-fine dust your eyes cannot see, but your nose can feel.
6. Odor Removal

No more harsh plastic odors taking over your room.

1. Pre-Filter Protection

Traps large resin fragments early, so inner filters last longer, even after countless print runs.
2. Large Particle Filtration

Traps resin chips and sanding fragments before they float into the room.
3. HEPA Fine Dust Filter

Captures strong VOC fumes from liquid resin, especially those from high-performance engineering resins.
4. Extra Particle Shield

Traps cured resin bits that sneak through the early stages.
5. Double HEPA Protection

One more protection to trap lingering VOCs during continuous resin printing.
6. Odor Removal

Locked away sharp resin odors, keeping your space fresh and comfortable.

Arco works with Air Purifier Max — print the adapter to connect with PentaShield. See FAQ below for details.

Capture Dust and Odors at the Source

Hook the hose right to your printer, so odors, dust, and VOCs never even hit the air you breathe.

Hand attaching the exhaust hose to the top of the Air Purifier Max, with the control panel shown below.

Printer-to-Purifier Design

Directs fumes straight into the purifier for immediate capture.

Illustration of the Air Purifier Max with a hose connected and airflow drawing fumes inside a closed loop.

No Leaks, No Smells

Closed-loop system keeps odors locked away, 24/7.

Phrozen and Elegoo resin 3D printers shown together, all compatible with the Air Purifier Max.

Universal Compatibility

Fits LCD resin and FDM printers, plus laser engravers, with a Ø70 mm inlet and Ø75 mm × 2 m hose.

Three Fan Speeds for Different Printing Needs

From large or high-volume to overnight prints, one tap is all it takes to keep your workspace clean and odor-free.

Power Mode

High-Emission Prints

240 m³/h

Big prints, ABS, Nylon, or laser engraving? Go full power and watch fumes vanish instantly.
Balanced Mode

Daily Prints

100 m³/h

Your everyday go-to. Quiet enough to forget, strong enough to keep the air fresh.
Quiet Mode

Energy-Saving Prints

60 m³/h

Overnight or small prints? This mode runs quietly while using less power and keeps filtering resin fumes while you rest.

All-Around Comfort for Every Print

Hand pulling the filter drawer out of the Air Purifier Max, with icons for one-pull access and quick, hassle-free swaps.

Quick, Tool-Free Filter Replacement

The slide-out filter makes maintenance simple, while the built-in replacement reminder helps you know when to change the filter.

Air Purifier Max on a bedroom floor showing 42 dB, with sound waves around it for quiet overnight use.

Quiet Operation, Flexible Airflow

Runs at just 42 dB, as quiet as a library. Works all night without wasting energy or disturbing your rest.

Air Purifier Max on a wooden table in a bright room while a person works at a desk with a 3D printer in the background.

Compact Size, Full Power Purification

The space-saving unit can be placed in suitable home workspaces, studios, or workshops. Follow the user manual for installation and ventilation.

Specifications

Main Unit Size: 298 × 295 × 440 mm
Main Unit Weight: 10.5 kg
Included Filters (6 Layers): Top G4 Filter Cotton ×1

HEPA Composite Filter (includes G4 ×2 + HEPA H12 ×2), available as replacement

Activated Carbon Filter, available as replacement
Max Airflow: 240 m³/h
Inlet Size: φ70 mm
Hose Size (Dia × L): φ75 × 2,000 mm

Note: The top G4 filter cotton is only included with new units. For replacement, please cut standard G4 filter sheets to size. (Reference spec: 20 mm thickness)

Replacement Filters

HEPA Filter Replacement

Filters out 99% of dust, fine particles, filament smoke, and resin micro-particles, and lasts approximately 1,200 hours.

Buy Now

Activated Carbon Filter Replacement

Includes 5 filters. Absorbs up to 80% of resin odor, plastic fumes, and volatile gases, and lasts approximately 800 hours.

Buy Now

Popular Brand Comparison

Item	Phrozen Air Purifier Max	Brand C	Brand B
Filter System	6 layers	5 layers	4 layers
Particulate Filtration System	40 mm G4 Filter Cotton ×3 50 mm HEPA ×2	G4 Filter Cotton ×1 HEPA ×1	G4 Filter Cotton ×1 F8 Filter ×1 HEPA ×1
Odor Filtration System	40 mm Activated Carbon Filter ×1	Activated Carbon Filter ×3	None
Compatibility	Phrozen Mega 8K S Mighty Revo 16K Mighty Revo 14K Mega 8K V2 ARCO + PentaShield* Elegoo Mars 5 Ultra Mars 4 Max Mars 4 DLP Saturn 4 Series Saturn 3 Series Saturn 2 Saturn 8K Jupiter SE Bambu Lab H2D*	Brand C 3D Printers	Limited Models of 3D Printers

Filter System

Air Purifier Max6 layers

Brand C5 layers

Brand B4 layers

Particulate Filtration System

Air Purifier Max40 mm G4 Filter Cotton ×3
50 mm HEPA ×2

Brand CG4 Filter Cotton ×1
HEPA ×1

Brand BG4 Filter Cotton ×1
F8 Filter ×1
HEPA ×1

Odor Filtration System

Air Purifier Max40 mm Activated Carbon Filter ×1

Brand CActivated Carbon Filter ×3

Brand BNone

Compatibility

Air Purifier Max Phrozen

Mega 8K S
Mighty Revo 16K
Mighty Revo 14K
Mega 8K V2
ARCO + PentaShield*

Elegoo

Mars 5 Ultra
Mars 4 Max
Mars 4 DLP
Saturn 4 Series
Saturn 3 Series
Saturn 2
Saturn 8K
Jupiter SE

Bambu Lab

H2D*

Brand CBrand C 3D Printers

Brand BLimited Models of 3D Printers

*Standard Magnetic Exhaust Port: Ø74 mm. If your machine's exhaust port has a different diameter, you can use a 3D-printed adapter in the matching size.

FAQ

Is Phrozen Air Purifier Max compatible with all Phrozen printers?

Yes. Sonic Mighty Revo 16K, Sonic Mighty Revo, Sonic Mega 8K S, and Sonic Mega V2 connect directly. Meanwhile, Sonic Mighty 12K, Sonic Mini 8K S, Sonic Mini 8K, Sonic Mighty 8K, and Lazervida Laser Cutter need an accessory. They can connect through the 3D Printer Enclosure Mega. For FDM printers (Arco + PentaShield), remove the outer metal mesh of the PentaShield fan and place the 3D-printed adapter (free to download on Pixup: https://pixup3d.com/en/posts/6966). Then attach the Air Purifier Max’s magnetic exhaust port with screws for a secure, seamless connection.

How is Phrozen Air Purifier Max different from regular home air purifiers?

Phrozen Air Purifier Max is purpose-built for 3D printing environments, focusing on source-level purification to stop fumes before they spread. It features a high-pressure exhaust system that directly connects to your printer’s enclosure, locking in dust, smoke, and resin odor — keeping them from leaking into your room. With a 6-layer filtration structure (including dual-thick HEPA filters and activated carbon layers), it captures a wide range of printing pollutants with up to 99.95% purification efficiency, ensuring a cleaner, safer, and odor-free workspace for creators.

Can I use the Air Purifier Max with non-Phrozen printers?

Yes, the Air Purifier Max is compatible with many non-Phrozen printers, such as Elegoo Mars 5 Ultra, Mars 4 Max, Mars 4 DLP, Saturn 4/3 Series, and Jupiter SE, which feature exhaust ports that fit the purifier’s Ø70 mm magnetic connector directly. For other brands, please check whether your machine’s exhaust port matches Ø70 mm. If not, you can 3D-print an adapter in the required size for a perfect fit.

I already have the Phrozen USB Air Purifier. Do I still need the Air Purifier Max?

Yes, they can be used together for enhanced results. The USB Air Purifier mainly targets resin odor, while the Air Purifier Max handles dust, smoke, and fumes directly from the printing chamber to prevent pollutants from leaking into your room. Using both devices together strengthens odor absorption and boosts overall air purification efficiency, creating a cleaner and safer printing environment.

Can I vent the filtered air directly into the room?

If the filters are not saturated, the purified air can be vented indoors. For the best air quality, we still recommend using an exhaust hose to vent the air outdoors. Follow the user manual for installation and ventilation guidance.

How long do the filters last, and how do I replace them?

The HEPA Composite Filter lasts approximately 1,200 hours, and the Activated Carbon Filter lasts approximately 800 hours; both are available separately as replacements. The top G4 filter cotton is supplied with the new unit. For replacement, cut a commercially available G4 sheet to the confirmed specifications. Actual filter life varies with use and fume concentration. Follow the user manual to replace the filter and reset the replacement indicator.

Phrozen Air Purifier Max

Resin or FDM, Clean Air as Always