Sonic Mini 4K: Unboxing•
Posted on March 09 2021
With a printing area of 6.1" and a 35μm, the Sonic Mini 4K prints with 4K resolution, producing highly detailed 3D models that match your exact designs.
In this article, we will guide you through the steps of unpacking your Sonic Mini 4K and introduce you to all the components and tools included in the box.
- Unpacking: Straight Out of the Box
- What’s in the Toolbox?
Unpacking: Straight Out of the Box
This box contains 1 Sonic Mini 4K, wrapped in plastic wrap, and three sections of cushions which is used to protect the LCD 3D printer. This includes an upper cushion, lower cushion, and an inner cushion. The Sonic Mini 4K toolbox is placed on top of the box.
Step 1: Open the box. Remove the upper cushioning and the toolbox.
Step 2: Take the resin 3D printer out of the box. Then place it on a flat and stable surface.
Step 3: Remove the plastic covering.
Step 4: Then remove the plastic case and the inner cushion.
What’s in the Toolbox?
The toolbox contains essential tools for setting up the Sonic Mini 4K as well as tools to maintain your device after you’ve finished printing.
*Important: Double-check to see whether everything is included in your toolbox. Make sure to understand how each tool is used before proceeding onto the next step.
The user manual contains essential information for users to set up their Sonic Mini 4K. This includes the introduction of functions and capabilities of the device, keynotes before printing, and a step-by-step tutorial for setting up the LCD 3D printer.
Please avoid direct contact with resin. This includes any part of your body or clothing. We suggest wearing PPE (Personal Protective Equipment) such as masks, goggles, and gloves while printing and using resin.
The metal scraper is used for removing models from the building plate after printing. The plastic scraper is for cleaning the resin vat after printing or removing cured resin that is stuck on the FEP film or LCD screen.
*Important: DO NOT use the metal scraper to remove cured resin stuck on the FEP film.
To start your device, you will need to connect the adapter to your Sonic Mini 4K. The touch panel will light up after around 3 seconds.
The Allen wrench included in the toolbox is intended for unscrewing and tightening the building plate while performing the Z-axis Calibration test.
Before printing, add the feet pads onto your device. These work to reduce vibrations, adding more stability during the printing process.
The plastic funnel is used for filtering out the excess resin after printing. Simply place the plastic funnel on top of the resin bottle cap, then pour the resin back into the bottle.
Sonic Mini 4K only supports USB drive file transfer. The USB is used to store your 3D printing file. Plug it into your Sonic Mini 4K and you’re good to go.
The backup screws are intended for the building plate.
Click here to learn about the hardware and components of your Sonic Mini 4K.
Sonic Mighty 8K : Checking Firmware & How to Reboot
Learn how to check the firmware on your Sonic Mighty 8K and how to perform a factory reset.Read More
Sonic Mighty 8K: Internet Connection & File Import
Learn how to connect your Sonic Mighty 8K and transfer files through the network.Read More