Sonic Mini 4K: Unboxing

unboxing Sonic Mini 4K

With a printing area of 6.1" and a 35μm, the Sonic Mini 4K prints with 4K resolution, producing highly detailed 3D models that match your exact designs.

In this article, we will guide you through the steps of unpacking your Sonic Mini 4K and introduce you to all the components and tools included in the box.

  • Unpacking: Straight Out of the Box 
  • What’s in the Toolbox? 

      Unpacking: Straight Out of the Box

      This box contains 1 Sonic Mini 4K, wrapped in plastic foil, with three sections of cushions used to protect the LCD 3D printer. This includes an upper cushion, lower cushion, and an inner cushion. The Sonic Mini 4K toolbox is placed on top of the box. 

      Remove toolbox

      Step 1:  Open the box. Remove the upper cushioning and the toolbox.

      Remove Sonic Mini 4K from the box
      Step 2:  Take the resin 3D printer out of the box. Then place it on a flat and stable surface. 

      Remove plastic covering
      Step 3:  Remove the plastic covering.


      Step 4:  Then remove the plastic case and the inner cushion.

      What’s in the Toolbox?

      Sonic Mini 4K Toolbox

      The toolbox contains essential tools for setting up the Sonic Mini 4K as well as tools to maintain your device after you’ve finished printing

      *Important: Double-check to see whether everything is included in your toolbox. Make sure to understand how each tool is used before proceeding onto the next step.

      User Manual
      The user manual contains essential information for users to set up their Sonic Mini 4K. This includes the introduction of functions and capabilities of the device, keynotes before printing, and a step-by-step tutorial for setting up the LCD 3D printer. 

      Gloves
      Please avoid direct contact with resin. This includes any part of your body or clothing. We suggest wearing PPE (Personal Protective Equipment) such as masks, goggles, and gloves while printing and using resin.

      Scraper Set
      The metal scraper is used for removing models from the build platform after printing. The plastic scraper is for cleaning the resin vat after printing or removing cured resin that is stuck on the FEP film or LCD screen.

      *Important: DO NOT use the metal scraper to remove cured resin stuck on the FEP film.

      Adapter
      To start your device, you will need to connect the adapter to your Sonic Mini 4K. The touch panel will light up after around 3 seconds. 

      Allen Wrench
      The Allen wrench included in the toolbox is intended for unscrewing and tightening the build platform while performing the Z-axis Calibration test.

      Feet Pads
      Before printing, add the feet pads onto your device. These work to reduce vibrations, adding more stability during the printing process. 

      Plastic Funnel
      The plastic funnel is used for filtering out the excess resin after printing. Simply place the plastic funnel on top of the resin bottle cap, then pour the resin back into the bottle

      USB
      Sonic Mini 4K only supports USB drive file transfer. The USB is used to store your 3D printing file. Plug it into your Sonic Mini 4K and you’re good to go. 

      Backup Screws
      The backup screws are intended for the build platform.

      Click here to learn about the hardware and components of your Sonic Mini 4K.

      Be the first to comment

      All comments are moderated before being published