Advice and answers from our team

Set a maintenance routine for your 3D printer so that it remains in good condition produces great results. In this article, we will provide an overview of daily maintenance required after each printing session in order to keep your 3D printer in good shape: 

After each print:

1. Clean the build plate:

After removing your 3D models from the build plate, wipe it with a paper towel. Then spray a small amount of 95% sanitizing alcohol and use a clean paper towel or fiber cloth to dry the surface. Finally, fasten the build plate back onto the LCD 3D printer.

2. Clean the resin vat

Filter out excess resin by using the funnel provided in the toolbox. Then use a clean paper towel to remove the remaining resin in the vat. Spray 95% sanitizing alcohol onto the FEP film and clean the leftover resin with a paper towel. For a more detailed tutorial, please refer to this article.

3. Clean the LCD screen

Check to see if there is any cured resin on the LCD screen. Use a blower to remove dust and lint from the LCD screen. Apply a small amount of 95% sanitizing alcohol on the LCD screen and wipe in one direction.

4. Clean the interior of your resin 3D printer

Inspect to see if there are any leaks or spills. Spray 95% sanitizing alcohol and use a paper towel or fiber cloth to clean the interior of the LCD 3D printer.  

Tip:

To learn how to maintain your device before each printing session, please refer to this article.

Did this answer your question?